Verfeinerung der Kristallstruktur von K2O2

Refinement of the Crystal Structure of K₂O₂ The crystal structure of K₂O₂ has been refined using 241 diffractometer data (Cmca; a = 6.733(1), b = 6.996(1), c = 6.474(1) Å; Z = 4; R_w = 0.050). The distance O? O (1.541(6) Å) is significantly larger than that one assumed for alkali metal peroxides, so far.     

Chromatographic Evaluation of the Lipophilic Properties of Selected Pesticides

Monolinuron, chlortoluron, diuron, isoproturon, linuron, diflubenzuron, dimefuron, teflubenzuron, and lufenuron have been chromatographed on an RP-HPLC column and on RP-HPTLC plates with methanol–water in different volume proportions as mobile phases. The retention values log k, and R_M were extrapolated to zero methanol content. Chromatographic lipophilicities (log k_w, R_Mw, _o(HPLC), and _{o (TLC)}) were compared with measured (log P_exp) partition coefficients and with values (A log Ps, IA log P, C log P, log P_Kowin, and x log P) calculated by use of five different software products. The most significant correlations were found between the chromatographic lipophilicities and C log P values. Satisfactory linear correlation was also obtained between lipophilicity (log k_w, R_Mw) and the valence Gutman index (M).     

4-羟基联苯4’-甲酸-L-2-甲基丁醇酯的合成

以4-羟基联苯，4-羟基4’-氰基联苯和手性L-2-甲基丁醇为原料，通过三条路线合成了铁电性液晶中间体4-羟基联苯4’-甲酸-L-2-甲基丁醇酯。5步法（醚化、酰化、溴仿、水解和酯化）总收率35．6％；3步法（酰化、溴仿和酯化）总收率50．7％；而以4-羟基-4＇-氰基联苯为原料的一步合成法收率64．4％。中间体和目标产物的结构经^1H NNR和IR确证。     

Ni(II)-糖胺金属配合物的合成、晶体结构及催化PNPP水解的活性研究

根据文献方法合成了金属配合物[Ni(HL)]Cl₂•2H₂O (HL＝1-[(2-氨乙基)氨基]-2-氨基-1,2-二脱氧-D-葡萄糖), 并用重结晶方法得到了适于X射线衍射的Ni(II)配合物的单晶. 通过对其进行元素分析、红外、紫外光谱及X射线衍射分析, 表明其为畸变的八面体构型. 最后研究了配合物对对硝基苯吡啶甲酸酯(PNPP)催化水解活性.     

离子液体两相不对称氢甲酰化催化反应的研究

从(R)-BINAP出发制备水溶性磺酸钠盐配体(R)-BINAPS,采用离子液体BF4和PF6为介质,实现其Rh配合物对乙酸乙烯酯的两相不对称氢甲酰化反应.实验结果表明,在以BF4为介质的乙酸乙烯酯不对称氢甲酰化反应中,该催化剂在温和条件下显示出高于相应均相体系的产物ee值和异构醛选择性,并在6次循环使用中,反应产物的ee值、选择性和转化率均无明显改变;在离子液体体系中添加适当的甲苯时,油溶性配体(R)-BINAP与Rh组成的配合物催化剂亦可形成类似的两相反应体系,但其活性和选择性在重复使用中呈明显下降趋势.本文还考察了溶剂体系、膦铑比、温度、压力、时间等的影响,并尝试苯乙烯的两相不对称氢甲酰化反应.     

Polypyrrole-Fe2O3 nanohybrid materials for electrochemical storage

We report on the synthesis and electrochemical characterization of nanohybrid polypyrrole (PPy) (PPy/Fe₂O₃) materials for electrochemical storage applications. We have shown that the incorporation of nanoparticles inside the PPy notably increases the charge storage capability in comparison to the “pure” conducting polymer. Incorporation of large anions, i.e., paratoluenesulfonate, allows a further improvement in the capacity. These charge storage modifications have been attributed to the morphology of the composite in which the particle sizes and the specific surface area are modified with the incorporation of nanoparticles. High capacity and stability have been obtained in PC/NEt₄BF₄ (at 20 mV/s), i.e., 47 mAh/g, with only a 3% charge loss after one thousand cyles. The kinetics of charge–discharge is also improved by the hybrid nanocomposite morphology modifications, which increase the rate of insertion–expulsion of counter anions in the bulk of the film. A room temperature ionic liquid such as imidazolium trifluoromethanesulfonimide seems to be a promising electrolyte because it further increases the capacity up to 53 mAh/g with a high stability during charge–discharge processes.     

Single‐Crystalline and Near‐Monodispersed NaMF3 (M=Mn,Co, Ni,Mg) and LiMAlF6 (M=Ca,Sr) Nanocrystals from Cothermolysis of Multiple Trifluoroacetates in Solution

We report the synthesis of single‐crystalline and near‐monodispersed NaMF₃ (M=Mn, Co, Ni, Mg), LiMAlF₆ (M=Ca, Sr), and NaMgF₃:Yb,Er nanocrystals (quasisquare nanoplates, nanorods, and nanopolygons) by the cothermolysis of multiple trifluoroacetates in hot combined organic solvents (oleic acid, oleylamine, and 1‐octadecene). The nanocrystals were characterized by XRD, TEM, superconductive quantum interference device (SQUID), and upconversion luminescence spectroscopy. By regulating the polarity of the dispersant, the NaMF₃ (M=Mn, Co, Ni) nanoplates were partially aligned to form nanoarrays on copper TEM grids. The sizes of the NaMF₃ nanocrystals were easily tuned by the use of proper synthetic conditions such as reaction temperature and time and solvent composition. On the basis of a series of experiments in which the reaction conditions were varied, together with GC–MS and FTIR analysis, the reaction pathways for the formation of these nanocrystals from trifluoroacetate precursors were proposed. The magnetic measurements showed that the differently sized NaMnF₃ square plates displayed interesting weak ferromagnetic behavior on the nanometer scale. The strong red upconversion luminescence emitted from the NaMgF₃:Yb,Er nanorods under 980‐nm near‐IR laser excitation suggests that NaMgF₃ may be a good candidate host material for red upconversion luminescence.     

N-取代苯甲酰基-N'-取代芳基硫脲的合成、晶体结构及生物活性

为了寻找新的高活性农药, 利用工业易得的三氟羧草醚及其中间体为起始原料, 设计合成了9个未见报道的N-取代苯甲酰基-N'-取代芳基硫脲化合物, 结构经IR, ¹H NMR, 元素分析确认. X射线衍射测定了化合物4b的晶体结构, 结果表明: 其分子属于三斜晶系, 空间群P-1, a＝0.51588(19) nm, b＝1.0766(4) nm, c＝2.0596(8) nm, α＝81.113(6)°, β＝89.702(6)°, γ＝78.131(6)°, V＝1.1056(7) nm³, D_c＝1.445 Mg/m³, Z＝2, F(000)＝492, μ＝0.319 mm^－1. 初步生物活性测试结果表明, 部分化合物具有较好的除草活性.     

液相色谱-质谱法测定纺织品和皮革制品中痕量全氟辛烷磺酸盐

建立了纺织品和皮革制品中全氟辛烷磺酸盐(PFOS)的液相色谱-二级质谱(LC-MS2)测定方法。样品经0.1mol/L HCl和甲醇超声波振荡提取,高效液相色谱分离;色谱柱为Zorbax SB-C18;流动相为V(甲醇)∶V(10mmol/L乙酸铵水溶液)=70∶30,流速为0.3mL/min。采用负离子模式的电喷雾质谱检测。以一级质谱得到的准分子离子m/z499作为母离子,进行二级质谱(MS2)分析。选择MS2的碎片离子m/z169、230、280、330及419定性确证,MS2总离子流色谱(TIC)峰面积定量。实验优化了样品提取方法和色谱、质谱条件,并对二级质谱碎裂机理和特征离子进行了研究。结果表明,本法简便快速,准确可靠,相对标准偏差小于8.6%,回收率在90%~99%之间;检出限为1.5mg/kg,远低于欧盟指令50mg/kg的限量规定。本方法已成功应用于纺织品、皮革制品中痕量PFOS的测定。     

Gas–liquid partition coefficients and Henry's law constants of methyl mercaptan in aqueous solutions of Fe(II)–CDTA chelate complex

Utilization of ferric chelate complex of trans-1,2-cyclohexanediaminetetraacetic acid (CDTA) for the oxidative scrubbing of H₂S and CH₃SH in Kraft mill streams can be beneficial from the standpoints of iron protection against precipitation and oxygen-mediated regenerative oxidation of the ferrous chelate CDTA. The physical solubility of methyl mercaptan in CDTA–Fe(III) complex cannot be measured directly because of oxidation of the sulfur-bearing gaseous species with the ferric chelate. Therefore, this investigation was carried out to determine the gas–liquid partition coefficients and Henry's law constants of methyl mercaptan in aqueous iron-free CDTA solutions and non-reacting ferrous chelate solutions (CDTA–Fe(II) complex), using the static headspace method with an estimated accuracy of about 2%. Experiments with aqueous solutions of chelate concentrations varying between 38 and 300 mol m⁻³ were carried out at temperatures between 298 and 333 K and atmospheric pressure. It was shown that the methyl mercaptan solubility decreases with increasing temperature for all systems but was not much influenced, in the studied conditions, by the chelate concentration especially at larger temperatures.